Clock service
We were arsked to service a mantel clock. Above are photos of before and after my service.
We were asked to service a clock start to finish and record it. I also stripped, re stained and lacquired the case and polished the bezel. This isnt included within a service but it was good practice for me. Below is everything a customer could expect from a service plus a little insight on what happens and a closer look inside a clock itself.
Testing the re-assembled clock
Movement under test in the university watch room
-.
Short video of me checking the time against restored clock after running for 3 days after first full wind.
-
Clock project part 1 & 2
I made this in the first 6 months of university.
I made this in the first 6 months of university.
I made this in the first 6 months of university.
This is the beginning of a clock project. It will continue to be worked on for the next 3 years, finally resulting in a fully working clock.
.
Mostly hand made components.
I made this in the first 6 months of university.
I made this in the first 6 months of university.
Everything was made by hand tools at the bench to test our skills. Part 2 did involve the use of a pedestal drill, table top lathe and soft and hard soldering.
All from 2 pieces of brass.
I made this in the first 6 months of university.
All from 2 pieces of brass.
It all started from a solid piece of brass or steel, even down to making and blueing the screws.